The sign is installed on road sections with a curve in terms of a small radius, if, when approaching the curve, it is difficult to determine the direction of the turn. Signs are installed on the outside of the curve on the continuation of the axis of the strip (strips) along which the movement towards the turn is carried out. At an intersection with a roundabout, sign 1.34.1 is installed on the central island opposite the corresponding entrance. It is allowed not to install the sign in the presence of artificial lighting of the intersection.

Signs with two arrows may be installed in cramped conditions. Signs with one arrow are installed along one curve, their number should be at least four, and the distance between them should not be more than 20 m.

Signs are installed at a height of 1.5 to 2.0 m.

The signs are made of galvanized metal 0.8-1 mm thick, with double flanging, which gives additional rigidity to the sign body. Each sign has two tongue-shaped attachment points. The fastening elements are attached to the body by the bulging method, which does not distort the image of the sign and provides much higher reliability than spot welding or riveting.

The sign denotes the direction of movement at the curve of a small radius road with limited visibility, as well as the direction of bypassing the road section being repaired. Road signs 1.34.1-1.34.3 are allowed to be used in places where road works are performed to additionally indicate the direction of bypassing the fenced area. Signs in this case are allowed to be placed on guarding devices

In this sign, the arrows point to the left

Base

The base of the road sign is galvanized steel, 0.8-1 mm thick. To increase rigidity, the workpiece is rolled to obtain a double flange. Thanks to additional stiffeners and reinforced fasteners, the possibility of deformation of the sign both from the wind and from other factors is excluded

To secure the road sign, the base is equipped with a special fastening such as a tongue. The mount is attached to the body at two points using the bullet method, which does not distort the image of the sign and provides much higher reliability than using spot welding or riveting. A road sign mask is applied to the surface of the base, made of high-quality reflective films in accordance with GOST R 52290-2004 and GOST 32945-2014

It's profitable with us!

Advantages of ordering road signs from us:

By ordering production of road signs with us, you will be pleasantly surprised not only by the quality of products, short terms and low prices, but also by the convenience of ordering. We draw your attention to the fact that the prices in the store are retail. We provide wholesale and regular customers with individual discounts up to 20%

Additionally

Types of films

Sizes of road signs

Sizes of signs 1.34.1-1.34.3 (table D.6)

We give a 5% discount for a review in

Already ordered with us? Leave your impressions about the quality of goods and the work of managers in the Yandex.Maps service at this link. When the review is published, tell the date of publication and the name of the account to the manager with the next order and get a 5% discount! See details of the action. Your opinion is valuable to us!

Customer memo

ORDERING

You can place an order in our store in 3 ways. Here we will consider only one - order through Online store:

You can also order goods through the "Order by E-mail" form or by sending a letter to our e-mail. Read more about these methods.

Warning signs inform drivers about approaching a dangerous section of the road, movement on which requires taking measures appropriate to the situation

1.1

Railway crossing with a barrier

Warning sign 1.1 outside populated areas is installed at a distance of 150 - 300 m, in populated areas at a distance of 50 - 100 m before the start of the dangerous section. Outside of settlements, sign 1.1 is repeated. The second sign is installed at a distance of at least 50 m before the start of the dangerous section. If necessary, the sign can be installed at a different distance, which in this case is indicated by label 8.1.1 .

1.2

Level crossing without a barrier

Warning sign 1.2 outside populated areas is installed at a distance of 150 - 300 m, in populated areas at a distance of 50 - 100 m before the start of the dangerous section. Outside settlements, sign 1.2 is repeated. The second sign is installed at a distance of at least 50 m before the start of the dangerous section. If necessary, the sign can be installed at a different distance, which in this case is indicated by label 8.1.1 .

1.3.1

Single track railway

Designation of a railway crossing unequipped with a barrier: with one track.

1.3.2

Multi-track railway

Designation of a railroad crossing without a barrier: with two or more tracks.

Installed immediately before the railway crossing.

1.4.1 1.4.2 1.4.3

1.4.4 1.4.5 1.4.6

Approaching the railway crossing

Additional warning about approaching a railway crossing outside settlements.

Outside settlements signs 1.4.1 - 1.4.3 are installed on the right side of the road, and signs 1.4.4 - 1.4.6 - on the left side proportionally at a distance of 150 - 300 meters to the railway crossing.

1.5

Intersection with a tram line

Warning sign 1.5 outside populated areas is installed at a distance of 150 - 300 m, in populated areas at a distance of 50 - 100 m before the start of the dangerous section. If necessary, the sign can be installed at a different distance, which in this case is indicated by label 8.1.1 .

1.6

Intersection of equivalent roads

Warning sign 1.6 outside settlements is installed at a distance of 150 - 300 m, in settlements at a distance of 50 - 100 m before the start of the dangerous section. If necessary, the sign can be installed at a different distance, which in this case is indicated by label 8.1.1 .

1.7

Roundabout intersection

Warning sign 1.7 outside populated areas is installed at a distance of 150 - 300 m, in populated areas at a distance of 50 - 100 m before the start of the dangerous section. If necessary, the sign can be installed at a different distance, which in this case is indicated by label 8.1.1 .

1.8

Traffic light regulation

An intersection, pedestrian crossing or section of road where traffic is regulated by traffic lights.

Warning sign 1.8 is installed outside of settlements at a distance of 150 - 300 m, in settlements at a distance of 50 - 100 m before the start of the dangerous section. If necessary, the sign can be installed at a different distance, which in this case is indicated by label 8.1.1 ... The yellow background on the sign 1.8, installed in the places of road works, means that this sign is temporary. In cases where the meanings of temporary road signs and stationary road signs contradict each other, drivers must follow the temporary signs.

1.9

Drawbridge

Drawbridge or ferry crossing.

Warning sign 1.9 outside populated areas is installed at a distance of 150 - 300 m, in populated areas at a distance of 50 - 100 m before the start of the dangerous section. Sign 1.9 is repeated outside settlements. The second sign is installed at a distance of at least 50 m before the start of the dangerous section. If necessary, the sign can be installed at a different distance, which in this case is indicated by label 8.1.1 .

1.10

Departure to the embankment

Departure to the embankment or shore.

Warning sign 1.10 outside settlements is installed at a distance of 150 - 300 m, in settlements at a distance of 50 - 100 m before the start of the dangerous section. Outside settlements, sign 1.10 is repeated. The second sign is installed at a distance of at least 50 m before the start of the dangerous section. If necessary, the sign can be installed at a different distance, which in this case is indicated by label 8.1.1 .

1.11.1

1.11.2

Dangerous bend

Rounding off the road with a small radius or with limited visibility: 1.11.1 to the right, 1.11.2 to the left.

Warning signs 1.11.1 and 1.11.2 outside settlements are installed at a distance of 150 - 300 m, in settlements at a distance of 50 - 100 m before the start of the dangerous section. If necessary, signs can be installed at a different distance, which in this case is indicated by label 8.1.1 .

1.12.1

1.12.2

Dangerous turns

A section of road with dangerous turns: 1.12.1 with the first turn to the right, 1.12.2 with the first turn to the left.

Warning signs 1.12.1 and 1.12.2 outside settlements are installed at a distance of 150 - 300 m, in settlements at a distance of 50 - 100 m before the start of the dangerous section. If necessary, signs can be installed at a different distance, which in this case is indicated by label 8.1.1 .

1.13

Steep descent

Warning sign 1.13 outside populated areas is installed at a distance of 150 - 300 m, in populated areas at a distance of 50 - 100 m before the start of the dangerous section. If necessary, the sign can be installed at a different distance, which in this case is indicated by label 8.1.1 ... Sign 1.13 can be installed without plates 8.1.1 immediately before the start of the descent, if the descents and ascents follow each other.

1.14

The steep climb

Warning sign 1.14 outside populated areas is installed at a distance of 150 - 300 m, in populated areas at a distance of 50 - 100 m before the start of the dangerous section. If necessary, the sign can be installed at a different distance, which in this case is indicated by label 8.1.1 ... Sign 1.14 can be installed without plates 8.1.1 immediately before the start of the ascent, if descents and ascents follow each other.

1.15

Slippy road

A section of the road with increased slipperiness of the carriageway.

Warning sign 1.15 outside populated areas is installed at a distance of 150 - 300 m, in populated areas at a distance of 50 - 100 m before the start of the dangerous section. If necessary, the sign can be installed at a different distance, which in this case is indicated by label 8.1.1 ... The yellow background on the sign 1.15, installed in the places of road works, means that this sign is temporary. In cases where the meanings of temporary road signs and stationary road signs contradict each other, drivers must follow the temporary signs.

1.16

Rough road

A section of the road that has irregularities on the roadway (waviness, potholes, irregular junctions with bridges, etc.).

Warning sign 1.16 outside populated areas is installed at a distance of 150 - 300 m, in populated areas at a distance of 50 - 100 m before the start of the dangerous section. If necessary, the sign can be installed at a different distance, which in this case is indicated by label 8.1.1 ... The yellow background on the sign 1.16, installed in the places of road works, means that this sign is temporary. In cases where the meanings of temporary road signs and stationary road signs contradict each other, drivers must follow the temporary signs.

1.17

Artificial unevenness

A section of road with artificial unevenness (irregularities) for a forced reduction in speed.

Warning sign 1.17 outside populated areas is installed at a distance of 150 - 300 m, in populated areas at a distance of 50 - 100 m before the start of the dangerous section. If necessary, the sign can be installed at a different distance, which in this case is indicated by label 8.1.1 .

1.18

Gravel ejection

A section of the road where it is possible to eject gravel, crushed stone and the like from under the wheels of vehicles.

Warning sign 1.18 outside populated areas is installed at a distance of 150 - 300 m, in populated areas at a distance of 50 - 100 m before the start of the dangerous section. If necessary, the sign can be installed at a different distance, which in this case is indicated by label 8.1.1 ... The yellow background on the sign 1.18, installed in the places of road works, means that this sign is temporary. In cases where the meanings of temporary road signs and stationary road signs contradict each other, drivers must follow the temporary signs.

1.19

Dangerous roadside

The section of the road where the exit to the side of the road is dangerous.

Warning sign 1.19 outside populated areas is installed at a distance of 150 - 300 m, in populated areas at a distance of 50 - 100 m before the start of the dangerous section. If necessary, the sign can be installed at a different distance, which in this case is indicated by label 8.1.1 ... The yellow background on the sign 1.19, installed in the places of road works, means that this sign is temporary. In cases where the meanings of temporary road signs and stationary road signs contradict each other, drivers must follow the temporary signs.

1.20.1

1.20.2

1.20.3

Road narrows

Narrowing of the road: on both sides 1.20.1, narrowing of the road on the right 1.20.2, narrowing of the road on the left 1.20.3.

Warning signs 1.20.1, 1.20.2 and 1.20.3 outside settlements are installed at a distance of 150 - 300 m, in settlements at a distance of 50 - 100 m before the start of the dangerous section. If necessary, signs can be installed at a different distance, which in this case is indicated by label 8.1.1

1.21

Two-way traffic

The beginning of a road section (carriageway) with oncoming traffic.

Warning sign 1.21 outside populated areas is installed at a distance of 150 - 300 m, in populated areas at a distance of 50 - 100 m before the start of the dangerous section. If necessary, the sign can be installed at a different distance, which in this case is indicated by label 8.1.1 ... If a sign has a yellow background, then the sign is temporary. In cases where the meanings of temporary road signs and stationary road signs contradict each other, drivers must follow the temporary signs.

1.22

Crosswalk

Pedestrian crossing indicated by signs , and / or markup 1.14.1 - 1.14.2 .

Warning sign 1.22 outside populated areas is installed at a distance of 150 - 300 m, in populated areas at a distance of 50 - 100 m before the start of the dangerous section. If necessary, the sign can be installed at a different distance, which in this case is indicated by label 8.1.1 .

1.23

Children

A section of road near a childcare facility (school, health camp, etc.), on the roadway of which children may appear.

Warning sign 1.23 outside populated areas is installed at a distance of 150 - 300 m, in populated areas at a distance of 50 - 100 m before the start of the dangerous section. If necessary, the sign can be installed at a different distance, which in this case is indicated by label 8.1.1 ... Sign 1.23 is repeated in settlements directly at the beginning of the dangerous section.

1.24

Intersection with a bike path or bike path

Bicycle drivers and pedestrians on a cycle (cycle) path must give way to vehicles moving on the road.

Warning sign 1.24 outside populated areas is installed at a distance of 150 - 300 m, in populated areas at a distance of 50 - 100 m before the start of the dangerous section. If necessary, the sign can be installed at a different distance, which in this case is indicated by label 8.1.1 .

1.25

Men at work

Road sign 1.25 during short-term works on the roadway can be installed without a plate 8.1.1 at a distance of 10 - 15 m to the place of work.

Warning sign 1.25 outside populated areas is installed at a distance of 150 - 300 m, in populated areas at a distance of 50 - 100 m before the start of the dangerous section. If necessary, the sign can be installed at a different distance, which in this case is indicated by label 8.1.1 ... Sign 1.25 is repeated in settlements directly at the beginning of the dangerous section.

1.26

Cattle drive

The sign is placed in front of road sections that run along pastures, cattle yards, fields, etc. Care should be taken to allow animals to pass.

Warning sign 1.26 outside populated areas is installed at a distance of 150 - 300 m, in populated areas at a distance of 50 - 100 m before the start of the dangerous section. If necessary, the sign can be installed at a different distance, which in this case is indicated by label 8.1.1 .

1.27

Wild animals

The sign is installed on road sections where the appearance of wild animals is possible. Care should be taken and be prepared to stop when animals enter the road.

Warning sign 1.27 outside settlements is installed at a distance of 150 - 300 m, in settlements at a distance of 50 - 100 m before the start of the dangerous section. If necessary, the sign can be installed at a different distance, which in this case is indicated by label 8.1.1 .